No products
Dovpo M VV II Mod
New product
A semi mech mod with adjustable voltage via a potentiometer dial and the benefits of a variety of safety features. The voltage output can be adjusted between 1V and 8V. A simple direct output device with no menus, screens or other adjustments.
**NOTE** Requires 2 x 18650 batteries (not included)
3 Items
- Write a review
Data sheet
| Capacity: | Requires 2 x 18650 batteries (not included) |
| Voltage: | Potentiometer dial adjustable between 1v - 8v |
| Charger: | 2A USB Type-C - cable included |
| Battery Level Indicator: | LED power light - green 7.6v or above, yellow 7.0v - 7.5v, red 6.9v or below |
| Digital Display: | No |
| Safety Features: | Low Voltage protection, Overheat protection, Reverse Polarity protection, Short Circuit protection, Overtime protection |
| Resistance Rank | 0.08ohm - 3.5ohm |
| Size: | 91mm X 53mm X 27mm |
| Weight: | 109g |
More info
A solid semi mech mod made of PC and Zinc Alloy. Depending on your build the adjustable voltage dial (up to 8v) can reach a maximum of 280w. A more practical and achievable high wattage range would sit around 200 - 220w. Coil resistance range of 0.08ohm - 3.5ohm.
A small LED power light shows the relative battery level. Green = 7.6V or above, Yellow = Between 7.0V and 7.5V, Red = 6.9V or below. The device can be charged via the included 2A USB Type-C charging cable where the LED light again shows the above range via colour change. Ideally you can charge the batteries using an external Li-Ion charger for better battery maintenance and safety.
The standard 510 thread seems well constructed and allows for a variety of tanks to be attached with great success. Tanks up to 25mm in diameter fit with no overhang.
The voltage adjustment dial is sweepable so you can fine tune to your output. Voltage adjustments can have a significant effect so it is best to start low and adjust in small increments. This is more of a vape by feel device. This is an instant fire device that will appeal to those who don't like a ramp up time. You will want to use quality 25A or higher 18650 batteries unless you plan to keep the dial in the lowest range.
Box Includes:
M VV II Device
2A USB Type-C charging cable
User Manual
